2020 Ford Transit Cutaway box truck upfit on a new build site with workers

2020 FORD TRANSIT CUTAWAY AND CHASSIS CAB

Build & Price

    PHOTO GALLERY

    TOP EQUIPMENT FOR YOUR BOTTOM LINE.

    2020 Ford Transit Cutaway box truck upfit on a new build site
    A coffee mug in the left side cupholder
    2020 Ford Transit Cutaway box truck upfit driving on an unpaved road
    Spacious two door two passenger Transit model
    Screen with lots of useful information next to the steering wheel
    2020 Ford Transit Cutaway mechanics truck upfit in front of large building with worker walking towards van
    A close up of the open tire jack component
    Profile view of review mirror and right door

    360° COLOURIZER

    BUILT FORD TOUGH®  FROM ANY ANGLE

    Spin 3 60 degrees Colourizer

    2020 Transit Chassis

    Exterior

    Build & Price

    BUILT FOR YOUR BUSINESS

    An all-new and expanded line of responsive gas and diesel engines. Newly available Intelligent All-Wheel-Drive System. Plus advances in driver-assist technology that provide an experience of driving confidence.
    2020 Ford Transit Cutaway on a gradient background

    ALL-NEW AND EXPANDED LINE OF ENGINES

    We now offer two ways to power up your business. Our new standard 3.5L PFDI V6 engine, along with our upgraded 3.5L Ecoboost® V6 engine. Partner either one of them with a new standard 10-speed automatic transmission and you’ve got a vehicle more than capable for the job ahead.

    NEW 3.5L PFDI V6

    3 point 5 litre V 6 engine
    The new standard engine in 2020 Transit Cutaway and Chassis Cab models delivers responsive impressive ratings of 275 HP @ 6,500 RPM and 262 lb.-ft. of torque.11 It's a 3.5L V6 engineered with the Ford port-fuel/direct-injection (PFDI) system. PFDI features two injectors per cylinder — one mounted in the air intake port, another inside the cylinder — to increase overall performance.

    UPGRADED 3.5L ECOBOOST® V6

    3 point 5 litre EcoBoost engine
    The outstanding performance of the 3.5L EcoBoost® V6 is now available in Ford Transit Cutaway and Chassis Cab models. EcoBoost® generates a level of performance you might expect from a larger-displacement engine. Power ratings of 306 horsepower11 and 400 lb.-ft. of torque11 come courtesy of two technologies: direct injection of fuel quickly into the combustion chambers (instead of intake ports) and twin turbochargers for an instantaneous surge of power with virtually no turbo lag.

    Explore Power

    CAPABILITY TO MOVE YOUR BUSINESS FORWARD

    2020 Ford Transit Cutaway and Chassis Cab offer more than new engine and transmission choices to power your business. You now also have the enhanced handling and traction capabilities of available Intelligent All-Wheel-Drive System on select wheelbases and GVWRs.
    A 2020 Ford Transit Cutaway on a suburban street

     

     

    NEW INTELLIGENT ALL-WHEEL-DRIVE SYSTEM

    A 2020 Ford Transit Cutaway on terrain
    The available new Intelligent All-Wheel-Drive System is not only designed to enhance handling and maximize traction, but it was also integrated into the vehicle’s design to ensure it didn’t raise the load floor or seat height. This makes entering and exiting as easy as it is in our standard model. Great news for drivers who are in and out of their vehicles a lot during the workday.

    RANGE OF GVWR AND PAYLOAD RATINGS

    A 2020 Ford Transit Chassis parked in a driveway
    Configure a Transit chassis to match your business across a wide range of gross vehicle weight and payload ratings in single- and dual-rear-wheel models. GVWRs range from 9,070 lbs. to 11,000 lbs.20 Maximum payloads less body weight are 4,420 lbs. and 6,400 lbs.20

    Explore Capability

    FORD CO-PILOT360™ TECHNOLOGY

    2020 Transit models now come with standard Ford Co-Pilot360™ Technology that can help you navigate our increasingly crowded roads and highways with greater confidence.10 Features included are Pre-Collision Assist with Automatic Emergency Braking (AEB)118 , Lane-Keeping System10 , 138 , Auto High-Beam Headlamps10 , and Rain Sensing Wipers10 .
    Illustration of Precollision Assist with Automatic Emergency Braking

    PRE-COLLISION ASSIST WITH AUTOMATIC EMERGENCY BRAKING (AEB)

    This standard Ford Co-Pilot360™ Technology feature can help reduce the severity of, and possibly eliminate, a collision with a vehicle directly in front of you.118 The system can detect a potential collision and provide audio and visual warnings. And Automatic Emergency Braking can even apply the brakes if necessary.10
    U.S. Model Shown.

    LANE-KEEPING SYSTEM

    With a camera scanning lane markings ahead, the standard Lane-Keeping System10 , 138 can assist you when you drift out of your lane. The Lane-Keeping Alert10 mode warns you with wheel vibrations simulating a rumble strip. When you are slow to react or don’t respond, Lane Keeping Assist10 can provide steering torque to help guide you safely back into the proper lane. Set the system to activate either the Alert or Assist mode, or both.
    U.S. Model Shown in Video.

    AUTO HIGH-BEAM HEADLAMPS

    You might not think of manually turning your high beams on or off every time you need to. That’s why the driver-activated standard Auto High-Beam Headlamps10 is so helpful — it can do that for you, automatically. When you’re on a dark road with no traffic, the high beams come on. But when a vehicle is approaching with headlamps on or travelling ahead with tail lamps visible, the system will dim to low beams to reduce glare.
    U.S. Model Shown in Video.
    of 3
    • 2020 Transit cutaway chassis

      FORD TRANSIT. STRENGTH AND VERSATILITY.

      Transit chassis models are built on a unique Ford uniladder frame that’s remarkably strong and designed with a clean CA (cab to axle) for easy and cost-efficient upfitting. Transit Cutaway with direct cab-to-body access is ideal for delivery, ambulances, shuttle buses and motorhomes. The Transit Chassis Cab accommodates multiple applications, like delivery boxes, utility and flatbed bodies.
    • New programmable upfitter interface module

      NEW PROGRAMMABLE UPFITTER INTERFACE MODULE

      Upfitting is easier than ever with the new available factory-installed programmable Upfitter Interface Module (UIM). Using a laptop or notebook, an upfitter can connect electrical equipment to CAN buses or ports and program switches to operate aftermarket-installed equipment, such as lift buckets and cranes, with up to nine digitally configurable inputs.
    Image of Fords extensive network of Commercial Vehicle Centre Dealers

    COMMERCIAL VEHICLE CENTRE DEALERS

    Commercial Vehicle Centre Dealers are specially trained and equipped to sell, service and finance Ford work vehicles for business customers. Let a Commercial Vehicle Centre Dealer show you all the exceptional services available for your business.

    Learn More